All Channels Driven—160 Watts RMS per channel x 7 from 20Hz to 20 kHz into 4 ohms with no more than 0.09% THD. All Channels Driven—100 Watts RMS per channel x 7 from 20 Hz to 20 kHz into 8 ohms with no more than 0.02% THD . Modular Design with 7 Separate Monoblock Amplifiers each built on Individual Circuit Boards. Two Toroidal Power Transformers. Wide Range Discrete Amplifier Stage (WRAS) for all channels. 12-Volt trigger input for remote turn-on. IMD at Rated Power:< 0.007%. Frequency Response +0, -2 dB: 5 Hz to 200 kHz. Damping Factor at 8 ohms: > 145. Signal-to- Noise Ratio: > 105 dB. Channel Separation (input shorted): 55 dB @ 1 kHz; 45 dB @ 10 kHz.
86 lbs. -shipping (HxWxD) 7 5/8 x 17 3/8 x 17 7/8 Black
6-WAY A/V DISTRIBUTION AMPLIFIER. Flat pack case allows easy space-saving positioning and mounting. Drives up to six audio/video components from a single A/V source. Low A/V distortion for crisp sound and picture. A/V input/outputs: RCA-type phono jacks. Power Supply: 16V DC @ 300 mA (included). Comes complete with power supply.
10”W x 2 3/4”D x 11/4”H (254mm x 70mm x 32mm)
Bring the highest definition home with this new Blu-Ray Player from Sherwood. Blu-ray 2.0 player with 6 channel analog audio output. Blu-Ray playback (BD, BD-R, BD-RE) DVD, VCD, DVD ±R/RW,CD-R/RW compatible. CD, MP3 CD; MP-3, WMA MPEG’s 1, 2 &4; VC-1; H-264. DivX Playback, JPEG. Output: HDMI 1.3; Component, Composite Scales output to 720p,1080i,1080p via HDMI. Component Video Output: 480i, 480p, 720p, 1080i. Deep Color; XV Color. Front Panel USB Host input. 192 kHz/24-Bit Audio DAC’s. Coaxial digital audio output. 5.1-channel audio output. 2-channel audio downmix output . Dolby TruHD; Dolby Digital Plus, Dolby Digital. DTS-HD High and Master Resolution. Software upgrade from CD or USB Flash Drive. Blu Ray Profile 2.0; BD-Live. Standby Power: < 1Watt
9 lbs. 16 15/16" W x 2 3/16" H x 10 1/4” D
2 ZONE MODULE. The EXP9 is a nine-zone expansion module designed to work exclusively with the ZPR68-10 Six-Zone Eight-Source Remote Preamp. A single EXP9 expands the ZPR68-10 to a total of 15 zones of control, while two EXP9 units can be used to create 24 zones of control (requires EXP1524 cable, not included).
3 ZONE MODULE. The EXP9 is a nine-zone expansion module designed to work exclusively with the ZPR68-10 Six-Zone Eight-Source Remote Preamp. A single EXP9 expands the ZPR68-10 to a total of 15 zones of control, while two EXP9 units can be used to create 24 zones of control (requires EXP1524 cable, not included).
4 ZONE MODULE. The EXP9 is a nine-zone expansion module designed to work exclusively with the ZPR68-10 Six-Zone Eight-Source Remote Preamp. A single EXP9 expands the ZPR68-10 to a total of 15 zones of control, while two EXP9 units can be used to create 24 zones of control (requires EXP1524 cable, not included).
5 ZONE MODULE. The EXP9 is a nine-zone expansion module designed to work exclusively with the ZPR68-10 Six-Zone Eight-Source Remote Preamp. A single EXP9 expands the ZPR68-10 to a total of 15 zones of control, while two EXP9 units can be used to create 24 zones of control (requires EXP1524 cable, not included).
6 ZONE MODULE. The EXP9 is a nine-zone expansion module designed to work exclusively with the ZPR68-10 Six-Zone Eight-Source Remote Preamp. A single EXP9 expands the ZPR68-10 to a total of 15 zones of control, while two EXP9 units can be used to create 24 zones of control (requires EXP1524 cable, not included).
7 ZONE MODULE. The EXP9 is a nine-zone expansion module designed to work exclusively with the ZPR68-10 Six-Zone Eight-Source Remote Preamp. A single EXP9 expands the ZPR68-10 to a total of 15 zones of control, while two EXP9 units can be used to create 24 zones of control (requires EXP1524 cable, not included).
8 ZONE MODULE. The EXP9 is a nine-zone expansion module designed to work exclusively with the ZPR68-10 Six-Zone Eight-Source Remote Preamp. A single EXP9 expands the ZPR68-10 to a total of 15 zones of control, while two EXP9 units can be used to create 24 zones of control (requires EXP1524 cable, not included).
9 ZONE MODULE. The EXP9 is a nine-zone expansion module designed to work exclusively with the ZPR68-10 Six-Zone Eight-Source Remote Preamp. A single EXP9 expands the ZPR68-10 to a total of 15 zones of control, while two EXP9 units can be used to create 24 zones of control (requires EXP1524 cable, not included).
Drives up to six audio/video components from a single A/V source. Compatible with all HDTV signals, analog video, and digital and analog audio signals. Low A/V distortion for crisp sound and picture Gold-plated RCA-type jacks. Supports component video (Y, Pb, Pr), RGBHV, and composite video. Supports analog Left & Right audio, digital audio S/PDIF. Allows up to 150 ft. runs
FOURZONE/SOURCE HD VIDEO DISTRIBUTION. The HD44C High Definition Component Video Matrix Switcher, allows high definition 1080i video and digital audio to be sent over standard coax with virtually no loss in signal quality. Four-Source, Four-Zone High Definition matrix video switcher with SD video capability. Buffered component video loop through and serial port expansion capability allow expansion to up to 16 zones of distribution. Component video inputs and S/PDIF digital audio inputs for each source component. 4 Coaxial Component video + S/PDIF digital audio outputs for each zone for distribution up to 250 feet. Controllable through IR (RC68X) and RS232 commands. Bandwidth supports resolutions of 1080i, 720p, 480p and 480i.
FOURZONE/SOURCE HD VIDEO DISTRIBUTION WITH CAT5. The HD44CC5 High Definition Component Video Matrix Switcher, allows high definition 1080i video and digital audio to be sent up to 1000 feet over CAT5 cable with virtually no loss in signal quality. Four-Source, Four-Zone High Definition matrix video switcher with SD video capability. Buffered component video loopthrough and serial port expansion capability allow expansion to up to 16 zones of distribution. Component video inputs and S/PDIF digital audio inputs for each source component. 4 Coaxial Component video + S/PDIF digital audio outputs for each zone for distribution up to 250 feet. Four RJ45 outputs for HD video and digital audio distribution up to 1000 feet over CAT5 wire. Coaxial component video output and RJ45 output active simultaneously. Controllable through IR (RC68X) and RS232 commands. Bandwidth supports resolutions of 1080i, 720p, 480p and 480i. Wires up with the B standard on Cat 5
Hi-Def,8X8 Matrix Switcher,Rca. The HD88CC5 eight-source, eight-zone, high-definition matrix switcher allows Hi-Definition Video and digital Audio signals to be sent over standard Coax cable with virtually no loss.The HD88C is ideal for installations requiring local switching and distribution up to 250''. Expandable up to 32 discreet Outputs (ZONES) by paralleling the inputs of up to 4 8x8 units.
12.6 lbs. 17" W x 7-3/4" D x 5-3/4" H
Hi-Def,8X8 Matrix Switcher,Rca/Cat5. The HD88CC5 eight-source, eight-zone, high-definition matrix switcher allows Hi-Definition Video and digital Audio signals to be sent over standard Coax cable or CAT5 cable with virtually no loss. Both coaxial component and CAT5 video outputs are active simultaneously, making it possible to distribute eight sources to sixteen outputs at the same time. Expandable up to 32 discreet Outputs (ZONES) by paralleling the inputs of up to 4 8x8 units.
12.6 lbs. 17" W x 7-3/4" D x 5-3/4" H
The HDMI-Link™ is an advanced audio/video switcher and video format converter designed to integrate the video output from an advanced A/V receiver with the A/V output of two HDMI-capable digital A/V source units into an HDMI-capable video monitor or TV. Provides remote (or RS-232) switching for 2 HDMI source units. Converts any component video input into an HDCP-compliant HDMI output.
8:8 HDMI Matrix with standard HDMI and UTP outputs. Provides IR routing, local IR for control, a remote for control, RS232, RS485 , and Ethernet (TCP/IP) for control. Each set contains an HDMI-A connector & 2 RJ45 as the second mirrored output. The two outputs work simultaneously. UTP supports dual or single CAT5e / Cat6 outputs.
Two channel high end audio preamplifier. Front panel jack for portable MP3 player with 12dB auto gain offset to match levels of other sources. 7 pairs of line level inputs. 1 input pair can be switched for MM or MC phono cartridge with correct input impedance. Can add to an existing surround system to upgrade analog 2 channel sound. Connect your 2 channel analog sources to the Model 2100 instead of to your surround receiver. Connects to surround receiver’s L, R, Sub line out jacks & to power amp’s input jacks. Blends seamlessly into surround system, automatic pass-through when turned off. Bypass input can be selected by remote. Creates a mono sub channel output for 2 channel analog sources. Analog bass management, low pass filter, adjustable 20 Hz - 140 Hz. Separate output jacks for full range (large speakers), 80 Hz high pass filtered (small speakers). 2-way RS-232 serial port connection. External IR repeater input & loop out jacks. Remote control includes discrete codes for Off and On. 2 auto turn on modes: AC power, 12v trigger. Selecting automatic turn/off defeats the front panel Power button. 12V trigger input jack and output jacks, 6’ (2m) trigger wire included. Fixed level audio record output. Headphone jack with auto mute for line out jacks. Motor-driven analog volume control. Balance control, bass & treble controls with defeat button. Remote handset includes tone on/off button. High current power supply. Accepts both 115v & 230v AC, detachable IEC AC cord. 2u chassis, rack mountable with RMK22 (sold separately)
Two Channel Amplifier. THX Ultra2 certified. 125 watts per channel into 8 ohms, both channels driven. 200 watts per channel into 4 ohms, both channels driven. 125 watts per channel into 2 ohms, both channels driven. 400 watts bridged into 8 ohms mono or 4 ohms mono. 35 amps peak current per channel. Impedance selector switch for 2W operation. Bridging switch for stereo or mono operation. A/B speaker terminals with individual on/off. 18 dB/octave high pass filter, switchable 20 Hz or 40 Hz. Fully discrete circuitry with toroid transformer. Efficient, low heat design. DC Servo and relay protection circuits. Automatic on/off by DC trigger with looping output. Automatic on/off by audio signal with adjustable sensitivity. Gold-plated RCA input jacks, loop output jacks. Heavy duty 24k gold-plated 5-way speaker terminals. Rear mounted gain controls; ground lift switch. 115/230v selector on rear panel. Standby, channel status, high temperature indicators. 2u chassis, with available rack mount kit.
(W x D x H): 17.25” x 16” x 4.25” / 3.5” without feet Black; Silver
Two Channel Amplifier. THX Ultra2 certified. 250 watts per channel into 8 ohms, both channels driven. 400 watts per channel into 4 ohms, both channels driven. 350 watts per channel into 2 ohms, both channels driven. 700 watts bridged into 8 ohms mono or 4 ohms mono. 45 amps peak current per channel. Impedance selector switch for 2W operation. Bridging switch for stereo or mono operation. A/B speaker terminals with individual on/off. 18 dB/octave high pass filter, switchable 20 Hz or 40 Hz. Fully discrete circuitry with toroid transformer. Efficient, low heat design. DC Servo and relay protection circuits. Automatic on/off by DC trigger with looping output. Automatic on/off by audio signal with adjustable sensitivity. Gold-plated RCA input jacks, loop output jacks. Heavy duty 24k gold-plated 5-way speaker terminals. Rear mounted gain controls; ground lift switch. 115/230v selector on rear panel. Standby, channel status, high temperature indicators. 3u chassis, with available rack mount kit.
(W x D x H): 17.25” x 16” x 6” / 5.25” without feet
Two Channel Amplifier. 75 watts per channel into 8 ohms, both channels driven. 125 watts per channel into 4 ohms, both channels driven. 125 watts per channel into 2 ohms, both channels driven. 200 watts bridged into 8 ohms mono or 4 ohms mono 30 amps peak current per channel. Impedance selector switch for 2W operation. Bridging switch for stereo or mono operation. A/B speaker terminals with individual on/off. 18 dB/octave high pass filter, switchable 20 Hz or 40 Hz. Fully discrete circuitry with toroid transformer. Efficient, low heat design. DC Servo and relay protection circuits. Automatic on/off by DC trigger with looping output. Automatic on/off by audio signal with adjustable sensitivity. Gold-plated RCA input jacks, loop output jacks. Heavy duty 24k gold-plated 5-way speaker terminals. Rear mounted gain controls; ground lift switch. 115/230v selector on rear panel. Standby, channel status, high temperature indicators. 1u chassis, with available rack mount kit.
(W x D x H): 17.25” x 16” x 2.5” / 1.75” without feet
